Dealing with a Unexpected Hot Water System Shutdown: Essential Actions
Dealing with a Unexpected Hot Water System Shutdown: Essential Actions
Blog Article
Just how do you actually feel in regards to What Would Cause My Electric Water Heater to Stop Working??
Several modern-day residences use an electric water heater for their heater, because of its convenience and convenience of use. Nevertheless, much like any other electrical devices, troubles may occur with its usage, all of a sudden. It can be actually discouraging to wake up to a cool shower as opposed to a hot one or having your bathroom with water that isn't warm sufficient or even also warm. Whatever the case might be, hot water heater problems can be fairly stressful. Thankfully, we have actually made a checklist of possible solutions to your hot water heater issues. There are a variety of aspects that could create a number of these problems, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you switch off the primary power supply for safety. Whatever the trouble is, getting it taken care of should not posture excessive of an issue if you follow these steps:
Call An Expert:
If after replacing all faulty components and resetting your temperature level, the water heater still isn't functioning, you may need to call a professional plumber for a professional viewpoint. The problem with your heating system could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of hot water required in your house. Whatever the case might be, a specialist plumber would help solve the trouble.
Examine Your Power Supply:
As basic as this might seem, it is very essential. Without ample power, your hot water heater will certainly not operate. So the first thing to do when your water suddenly retires is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it on and off once again. Replace any busted or worn-out fuse. Evaluate the home appliance with power after these changes to see if it's currently functioning.
Check Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't warm enough, you might need to inspect the temperature level setups on your top thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the access panel and press the red button for temperature level reset over the thermostat. This need to assist warm the water. Transform the breaker back on and check if the problem has been settled.
Examine the Heating Element in the Hot Water Heater:
If it's not a power trouble, then try looking into your burner if it is still working. Evaluate each of your burner to ensure the trouble isn't with any one of them. If any one of them is malfunctioning, change that part and then check whether the hot water is back on.
Final thought
Hot water heater troubles are not constantly major. Much of them result from small concerns like a blown fuse or damaged burner. Changing the damaged components need to suffice. Nevertheless, if you are still not able to resolve the problem, give a call to your closest plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I'm very serious about What Would Cause My Electric Water Heater to Stop Working? and I am hoping you liked the entire post. Sharing is good. Helping people is fun. Many thanks for taking the time to read it.
Book A Service Call Report this page